Damien Miller
0b4d48ba74
- [email protected] 2008/07/04 23:30:16
...
[auth1.c auth2.c]
Make protocol 1 MaxAuthTries logic match protocol 2's.
Do not treat the first protocol 2 authentication attempt as
a failure IFF it is for method "none".
Makes MaxAuthTries' user-visible behaviour identical for
protocol 1 vs 2.
ok dtucker@
2008-07-05 09:44:53 +10:00
Darren Tucker
7c99b1ceda
- [email protected] 2008/07/02 13:30:34
...
[auth2.c]
really really remove the freebie "none" auth try for protocol 2
2008-07-04 12:53:23 +10:00
Darren Tucker
4230a5dc30
- [email protected] 2008/07/02 12:36:39
...
[auth2-none.c auth2.c]
Make protocol 2 MaxAuthTries behaviour a little more sensible:
Check whether client has exceeded MaxAuthTries before running
an authentication method and skip it if they have, previously it
would always allow one try (for "none" auth).
Preincrement failure count before post-auth test - previously this
checked and postincremented, also to allow one "none" try.
Together, these two changes always count the "none" auth method
which could be skipped by a malicious client (e.g. an SSH worm)
to get an extra attempt at a real auth method. They also make
MaxAuthTries=0 a useful way to block users entirely (esp. in a
sshd_config Match block).
Also, move sending of any preauth banner from "none" auth method
to the first call to input_userauth_request(), so worms that skip
the "none" method get to see it too.
2008-07-02 22:56:09 +10:00
Damien Miller
b8c9807628
- [email protected] 2007/09/29 00:25:51
...
[auth2.c]
Remove unused prototype. ok djm@
2007-10-26 14:26:15 +10:00
Darren Tucker
208ac57c30
- [email protected] 2007/04/14 22:01:58
...
[auth2.c]
remove unused macro; from Dmitry V. Levin <[email protected] >
2007-05-20 14:58:41 +10:00
Darren Tucker
1d75f22c5d
- [email protected] 2007/03/01 10:28:02
...
[auth2.c sshd_config.5 servconf.c]
Remove ChallengeResponseAuthentication support inside a Match
block as its interaction with KbdInteractive makes it difficult to
support. Also, relocate the CR/kbdint option special-case code into
servconf. "please commit" djm@, ok markus@ for the relocation.
2007-03-01 21:31:28 +11:00
Damien Miller
d783435315
- [email protected] 2006/08/03 03:34:42
...
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c]
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ]
[auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c]
[buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c]
[groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c]
[key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c]
[monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c]
[readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h]
[serverloop.c session.c session.h sftp-client.c sftp-common.c]
[sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c]
[ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c]
[uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h]
[loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h]
almost entirely get rid of the culture of ".h files that include .h files"
ok djm, sort of ok stevesk
makes the pain stop in one easy step
NB. portable commit contains everything *except* removing includes.h, as
that will take a fair bit more work as we move headers that are required
for portability workarounds to defines.h. (also, this step wasn't "easy")
2006-08-05 12:39:39 +10:00
Damien Miller
e3476ed03b
- [email protected] 2006/07/22 20:48:23
...
[atomicio.c auth-options.c auth-passwd.c auth-rhosts.c auth-rsa.c]
[auth.c auth1.c auth2-chall.c auth2-hostbased.c auth2-passwd.c auth2.c]
[authfd.c authfile.c bufaux.c bufbn.c buffer.c canohost.c channels.c]
[cipher-3des1.c cipher-bf1.c cipher-ctr.c cipher.c clientloop.c]
[compat.c deattack.c dh.c dns.c gss-genr.c gss-serv.c hostfile.c]
[includes.h kex.c kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c log.c]
[mac.c match.c md-sha256.c misc.c moduli.c monitor.c monitor_fdpass.c]
[monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c rsa.c]
[progressmeter.c readconf.c readpass.c scp.c servconf.c serverloop.c]
[session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshpty.c ttymodes.c uidswap.c xmalloc.c]
move #include <string.h> out of includes.h
2006-07-24 14:13:33 +10:00
Damien Miller
9f2abc47eb
- [email protected] 2006/07/06 16:03:53
...
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c]
[auth-rhosts.c auth-rsa.c auth.c auth.h auth2-hostbased.c]
[auth2-pubkey.c auth2.c includes.h misc.c misc.h monitor.c]
[monitor_wrap.c monitor_wrap.h scp.c serverloop.c session.c]
[session.h sftp-common.c ssh-add.c ssh-keygen.c ssh-keysign.c]
[ssh.c sshconnect.c sshconnect.h sshd.c sshpty.c sshpty.h uidswap.c]
[uidswap.h]
move #include <pwd.h> out of includes.h; ok markus@
2006-07-10 20:53:08 +10:00
Damien Miller
57c30117c1
- [email protected] 2006/03/25 13:17:03
...
[atomicio.c auth-bsdauth.c auth-chall.c auth-options.c auth-passwd.c]
[auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth-skey.c auth.c auth1.c]
[auth2-chall.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c]
[buffer.c canohost.c channels.c cipher-3des1.c cipher-bf1.c]
[cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c compress.c]
[deattack.c dh.c dispatch.c fatal.c groupaccess.c hostfile.c kex.c]
[kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c]
[mac.c match.c md-sha256.c misc.c monitor.c monitor_fdpass.c]
[monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c progressmeter.c]
[readconf.c readpass.c rsa.c scard.c scp.c servconf.c serverloop.c]
[session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c]
[sftp.c ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c]
[sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c]
[uidswap.c uuencode.c xmalloc.c]
Put $OpenBSD$ tags back (as comments) to replace the RCSID()s that
Theo nuked - our scripts to sync -portable need them in the files
2006-03-26 14:24:48 +11:00
Damien Miller
91d4b12fcb
- [email protected] 2006/03/20 18:17:20
...
[auth1.c auth2.c sshd.c]
sprinkle some ARGSUSED for table driven functions (which sometimes
must ignore their args)
2006-03-26 14:05:20 +11:00
Damien Miller
b0fb6872ed
- [email protected] 2006/03/19 18:51:18
...
[atomicio.c auth-bsdauth.c auth-chall.c auth-krb5.c auth-options.c]
[auth-pam.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c]
[auth-shadow.c auth-skey.c auth.c auth1.c auth2-chall.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c]
[auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c buffer.c]
[canohost.c channels.c cipher-3des1.c cipher-acss.c cipher-aes.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c entropy.c fatal.c]
[groupaccess.c hostfile.c includes.h kex.c kexdh.c kexdhc.c]
[kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c loginrec.c]
[loginrec.h logintest.c mac.c match.c md-sha256.c md5crypt.c misc.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_wrap.c msg.c]
[nchan.c packet.c progressmeter.c readconf.c readpass.c rsa.c]
[scard.c scp.c servconf.c serverloop.c session.c sftp-client.c]
[sftp-common.c sftp-glob.c sftp-server.c sftp.c ssh-add.c]
[ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c]
[ssh-rand-helper.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c]
[sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c]
[uidswap.c uuencode.c xmalloc.c openbsd-compat/bsd-arc4random.c]
[openbsd-compat/bsd-closefrom.c openbsd-compat/bsd-cygwin_util.c]
[openbsd-compat/bsd-getpeereid.c openbsd-compat/bsd-misc.c]
[openbsd-compat/bsd-nextstep.c openbsd-compat/bsd-snprintf.c]
[openbsd-compat/bsd-waitpid.c openbsd-compat/fake-rfc2553.c]
RCSID() can die
2006-03-26 00:03:21 +11:00
Darren Tucker
d3eff2bfa5
- (dtucker) [auth2.c] Move start_pam() calls out of if-else block to remove
...
duplicate call. ok djm@
2005-09-24 12:43:51 +10:00
Damien Miller
b6f72f5294
-(djm) [audit.c auth1.c auth2.c entropy.c loginrec.c serverloop.c]
...
[ssh-rand-helper.c] fix portable 2nd level indents at 4 spaces too
2005-07-17 17:26:43 +10:00
Darren Tucker
2e0cf0dca2
- (dtucker) [audit.c audit.h auth.c auth1.c auth2.c loginrec.c monitor.c
...
monitor_wrap.c monitor_wrap.h session.c sshd.c]: Prepend all of the audit
defines and enums with SSH_ to prevent namespace collisions on some
platforms (eg AIX).
2005-02-08 21:52:47 +11:00
Darren Tucker
269a1ea1c8
- (dtucker) [Makefile.in auth.c auth.h auth1.c auth2.c loginrec.c monitor.c
...
monitor.h monitor_wrap.c monitor_wrap.h session.c sshd.c] Bug #125 :
(first stage) Add audit instrumentation to sshd, currently disabled by
default. with suggestions from and djm@
2005-02-03 00:20:53 +11:00
Darren Tucker
c13866719f
- (dtucker) [auth1.c auth2.c] If the user successfully authenticates but is
...
subsequently denied by the PAM auth stack, send the PAM message to the
user via packet_disconnect (Protocol 1) or userauth_banner (Protocol 2).
ok djm@
2004-12-03 14:33:47 +11:00
Darren Tucker
77fc29eeb3
- (dtucker) [auth-pam.c auth.h auth2-none.c auth2.c monitor.c monitor_wrap.c]
...
Bug #892 : Send messages from failing PAM account modules to the client via
SSH2_MSG_USERAUTH_BANNER messages. Note that this will not happen with
SSH2 kbdint authentication, which need to be dealt with separately. ok djm@
2004-09-11 23:07:03 +10:00
Darren Tucker
5cb30ad2ec
- [email protected] 2004/07/28 09:40:29
...
[auth.c auth1.c auth2.c cipher.c cipher.h key.c session.c ssh.c
sshconnect1.c]
more s/illegal/invalid/
2004-08-12 22:40:24 +10:00
Damien Miller
30d1f84911
- [email protected] 2004/07/21 10:33:31
...
[auth1.c auth2.c]
bz#899: Don't display invalid usernames in setproctitle
2004-07-21 20:48:53 +10:00
Darren Tucker
89413dbafa
- [email protected] 2004/05/23 23:59:53
...
[auth.c auth.h auth1.c auth2.c servconf.c servconf.h sshd_config sshd_config.5]
Add MaxAuthTries sshd config option; ok markus@
2004-05-24 10:36:23 +10:00
Darren Tucker
dbf7a74ee5
- (dtucker) [auth-pam.c auth-pam.h auth1.c auth2.c monitor.c monitor_wrap.c
...
monitor_wrap.h] Bug #808 : Ensure force_pwchange is correctly initialized
even if keyboard-interactive is not used by the client. Prevents segfaults
in some cases where the user's password is expired (note this is not
considered a security exposure). ok djm@
2004-03-08 23:04:06 +11:00
Damien Miller
3e3b5145e5
- [email protected] 2003/11/04 08:54:09
...
[auth1.c auth2.c auth2-pubkey.c auth.h auth-krb5.c auth-passwd.c]
[auth-rhosts.c auth-rh-rsa.c auth-rsa.c monitor.c serverloop.c]
[session.c]
standardise arguments to auth methods - they should all take authctxt.
check authctxt->valid rather then pw != NULL; ok markus@
2003-11-17 21:13:40 +11:00
Darren Tucker
3e33cecf71
- [email protected] 2003/09/23 20:17:11
...
[Makefile.in auth1.c auth2.c auth.c auth.h auth-krb5.c canohost.c
cleanup.c clientloop.c fatal.c gss-serv.c log.c log.h monitor.c monitor.h
monitor_wrap.c monitor_wrap.h packet.c serverloop.c session.c session.h
ssh-agent.c sshd.c]
replace fatal_cleanup() and linked list of fatal callbacks with static
cleanup_exit() function. re-refine cleanup_exit() where appropriate,
allocate sshd's authctxt eary to allow simpler cleanup in sshd.
tested by many, ok deraadt@
2003-10-02 16:12:36 +10:00
Damien Miller
856f0be669
- [email protected] 2003/08/26 09:58:43
...
[auth-passwd.c auth.c auth.h auth1.c auth2-none.c auth2-passwd.c]
[auth2.c monitor.c]
fix passwd auth for 'username leaks via timing'; with djm@, original
patches from solar
2003-09-03 07:32:45 +10:00
Darren Tucker
1e66a39e40
- [email protected] 2003/08/22 13:22:27
...
[auth2.c] (auth2-krb5.c removed)
nuke "[email protected] "
2003-08-26 12:08:15 +10:00
Darren Tucker
0efd155c3c
- [email protected] 2003/08/22 10:56:09
...
[auth2.c auth2-gss.c auth.h compat.c compat.h gss-genr.c gss-serv-krb5.c
gss-serv.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h readconf.c
readconf.h servconf.c servconf.h session.c session.h ssh-gss.h
ssh_config.5 sshconnect2.c sshd_config sshd_config.5]
support GSS API user authentication; patches from Simon Wilkinson,
stripped down and tested by Jakob and myself.
2003-08-26 11:49:55 +10:00
Damien Miller
1f499fd368
- (djm) Bug #564 : Perform PAM account checks for all authentications when
...
UsePAM=yes; ok dtucker
2003-08-25 13:08:49 +10:00
Darren Tucker
502d384b74
- [email protected] 2003/06/24 08:23:46
...
[auth2-hostbased.c auth2-pubkey.c auth2.c channels.c key.c key.h
monitor.c packet.c packet.h serverloop.c sshconnect2.c sshd.c]
int -> u_int; ok djm@, deraadt@, mouring@
2003-06-28 12:38:01 +10:00
Damien Miller
4e448a31ae
- (djm) Add new UsePAM configuration directive to allow runtime control
...
over usage of PAM. This allows non-root use of sshd when built with
--with-pam
2003-05-14 15:11:48 +10:00
Damien Miller
3ab496b3dd
- [email protected] 2003/05/14 02:15:47
...
[auth2.c monitor.c sshconnect2.c auth2-krb5.c]
implement kerberos over ssh2 ("[email protected] "); tested with jakob@
server interops with commercial client; ok jakob@ djm@
2003-05-14 13:47:37 +10:00
Damien Miller
d558092522
- (djm) RCSID sync w/ OpenBSD
2003-05-14 13:40:06 +10:00
Damien Miller
1a27a1ee8c
- (djm) Bug #117 : Don't lie to PAM about username
2003-05-14 10:27:09 +10:00
Darren Tucker
97363a8b24
- (dtucker) Move handling of bad password authentications into a platform
...
specific record_failed_login() function (affects AIX & Unicos).
2003-05-02 23:42:25 +10:00
Ben Lindstrom
f50ad1fd04
- (bal) auth2.c same changed as above.
2003-04-27 18:44:31 +00:00
Damien Miller
996acd2476
*** empty log message ***
2003-04-09 20:59:48 +10:00
Damien Miller
556f9315a5
- [email protected] 2003/02/06 21:22:43
...
[auth1.c auth2.c]
undo broken fix for #387 , fixes #486
2003-02-24 11:59:26 +11:00
Tim Rice
81ed518b9b
Cray fixes (bug 367) based on patch from Wendy Palm @ cray.
...
This does not include the deattack.c fixes.
2002-09-25 17:38:46 -07:00
Damien Miller
de6f2de8ad
- [email protected] 2002/08/22 21:33:58
...
[auth1.c auth2.c]
auth_root_allowed() is handled by the monitor in the privsep case,
so skip this for use_privsep, ok stevesk@, fixes bugzilla #387/325
2002-09-04 16:37:26 +10:00
Ben Lindstrom
e06eb68226
- (bal) Failed password attempts don't increment counter on AIX. Bug #145
2002-07-04 00:27:21 +00:00
Ben Lindstrom
5a9d0eaba6
- [email protected] 2002/06/30 21:54:16
...
[auth2.c session.c sshd.c]
lint asks that we use names that do not overlap
2002-07-04 00:12:53 +00:00
Damien Miller
43cecc1392
some xxx's for future privsep cleanup
2002-06-21 16:21:11 +10:00
Ben Lindstrom
b85ab30a6e
- (bal) Refixed auth2.c. It was never fully commited while spliting out
...
authentication to different files.
2002-06-07 02:05:25 +00:00
Ben Lindstrom
511bb24c5b
- [email protected] 2002/05/31 11:35:15
...
[auth.h auth2.c]
move Authmethod definitons to per-method file.
NOTE: The rest of this patch is with the import of the auth2-*.c files.
2002-06-06 20:52:37 +00:00
Ben Lindstrom
855bf3ac3c
- [email protected] 2002/05/25 18:51:07
...
[auth.h auth2.c auth2-hostbased.c auth2-kbdint.c auth2-none.c
auth2-passwd.c auth2-pubkey.c Makefile.in]
split auth2.c into one file per method; ok provos@/deraadt@
NOTE: Merged back noticable cygwin and pam stuff. May need review to
ensure I did not miss anything.
2002-06-06 20:27:55 +00:00
Ben Lindstrom
58d4dafeb1
- [email protected] 2002/05/13 02:37:39
...
[auth-skey.c auth2.c]
less warnings. skey_{respond,query} are public (in auth.h)
2002-05-15 16:14:36 +00:00
Damien Miller
5ad9fd9820
- (djm) Bug #231 : UsePrivilegeSeparation turns off Banner.
2002-05-13 11:07:41 +10:00
Damien Miller
ffc868ff83
- (djm) Disable PAM kbd-int auth if privsep is turned on (it doesn't work)
2002-05-09 15:59:13 +10:00
Damien Miller
7941855f09
- (djm) Make privsep work with PAM (still experimental)
2002-04-23 20:28:48 +10:00
Kevin Steves
e683e76439
- (stevesk) [auth-pam.c auth-pam.h auth-passwd.c auth-sia.c auth-sia.h
...
auth1.c auth2.c] PAM, OSF_SIA password auth cleanup; from djm.
2002-04-04 19:02:28 +00:00